features mechanical data maximum ratings & electrical characteristics data sheet no. TPFD-7501-1A 75 amp 24 volt press fit tvs diodes tel.: (310) 767-1052 fax: (310) 767-7958 diotec electronics corp gardena, ca 90248 u.s.a 18020 hobart blvd., unit b ratings at 25 c ambient temperature unless otherwise specified. case: nickel plated copper finish: all external surfaces are corrosion resistant and the contact areas are readily solderable soldering temperature: 210 c maximum mounting position: any. maximum force used for diode insertion to be 12 kn o polarity: color coded epoxy ring. anode on lead (beige ring):part number=tvs7524pfa. cathode on lead (black ring):part no.=tvs7524pfc. part no. marked on cap base. non-repetitive peak forward surge current(half wave, single phase, 60 hz sine applied to rated load) repetitive peak reverse surge current (time constant = 10 msec duty cycle < 1.0%, tc = 25 c) o average forward rectified current maximum thermal resistance, junction to case junction operating & storage temperature range maximum dc reverse current (v = 20v dc, tc = 25 c) r o instantaneous forward voltage (i = 100a@ 300 secpulse, t = 25 c) f c m o i r r q jc t ,t j stg v f 0.97 0.97 0.50 0.50 -65 to +215 150 800 1.05 1.05 75 i o i rsm i fsm breakdown voltage (i = 100 ma dc, tc = 25 c) r o parameter (test conditions) maximum recurrent peak reverse voltage maximum dc blocking voltage working peak reverse voltage series number v (br) v rwm v dc v rrm symbol 24 min / 32 max 23 tvs7524pfc ratings maximum typical 200 200 -65 to +215 150 800 75 volts c/w c amps na 2.03 tvs7524pf 24 min / 32 max 23 tvs7524pfa units volts mechanical specification round die 0.250 78 placesequally spaced 0.007 0.005 70 typ. o all dimensions in inches 0.050 0.002 + _ 0.505 /502 over knurl 1.32 1.26 0.401 0.385 0.173 0.157 0.039 0.031 0.194 0.184 proprietary junction passivation for superior reliability and performance low forward volatge drop void free vacuum die soldering for maximum mechanical strength and heat dissipation (solder voids: typical < 2%, max. < 10% of die area) large die for high power heavy duty performance high heat handling capability with very low thermal stress j5 dt 0504 tvs7524pfa rohs com pliant
|
